Dyna 4000 Ignition Accessories

Drag Racing » Dyna 4000 Motorcycle Ignition Accessories


PRODUCT OVERVIEW: Dynatek Pro Series Crank Trigger

Dynatek Pro Series Crank Trigger is a newly designed crankshaft pickup for use with the Dyna 2000 Sportbike and Dyna 4000 Pro Ignition System. The Pro Series Pickup consists of a blue anodized aluminum base plate with two injection molded pickup assemblies. The Pro Series Crank Trigger is a superior pickup for the 4000 for the following reasons:

  • Improved noise margin - The Pro Series Crank Trigger provides a stronger pickup signal with more distinct high and low voltage levels for improved triggering of the 4000 in harsh environments.
  • Total immunity to engine grounding problems - The Pro Series Crank Trigger is electrically isolated from the engine case (unlike it's predecessor, the Dyna S), giving total immunity to electronic problems associated with inadequate engine grounding.
  • Pre-wired for the DYNA 4000 ignition - The Pro Series Crank Trigger is a direct plug in!
  • Shorter Module Height - The Pro Series Crank Trigger modules are 1/2" tall (Dyna S is 3/4" tall) allowing them to fit under GSXR ignition covers without modification
  • Lighter weight
  • Lower cost
  • Uses standard Dyna 4000 magnet rotors
 

PRODUCT OVERVIEW: Dyna Digital Remote Display

Dyna Digital Remote Display is a companion product for use with the DYNA 4000 Super Pro ignition. The Remote Display simply plugs into a pigtail on the Super Pro harness to give you access to the following features:

  • Real time digital read out of engine rpm - Set low or high rpm limit from handle bar area with engine running.
  • Both rev limiters can be set from 2000 to 16000 rpm in 200 rpm increments.
  • Clutch switch indicator LED allows precise adjustment of clutch switch operation.
  • Test mode allows all ignition system functions to be tested with the engine off. In Test Mode you can cause the ignition to create sparks at a simulated rpm with the engine not running. All ignition functions work, rev limits, shift kill function, and tach output. This allows you to test all other accessories atttached to the ignition system also, such as shift light, data recorder, or other devices.
 

PRODUCT OVERVIEW: Dynatek Two Stage Retard Module

The new and improved Dynatek Two Stage Retard Module (P/N TSRAM) now offers progressive timing retard or advance in 2 separately adjustable stages. The new TSRAM is adjustable for 0-20 degrees of ignition timing retard in 2 degree increments over a 4 second time span in second increments. It can also be used as a progressive timing advance device so that the user may start off with a retarded timing setting and then build the timing back in over a set time span. This is adjustable from 20-0 degrees and 0- 4 seconds in second increments. If more than 2 stages of timing control are desired 2 TSRAM modules may be connected in series. The new TSRAM can be used for both 4 cylinder and V-Twin applications where the Dyna 4000 ignition system is used.

 

PRODUCT OVERVIEW: Dyna Shift Counter

Dyna Shift Counter is the missing link of the chain of systems on a drag bike. The Shift Counter provides the proper interaction between the air shifter system, the ignition system, the transmission, and other systems.

  • Built-in programmable electronic shift kill (replaces failure prone, not easily adjustable, mechanical air kill switches) Includes 1-2 auto, 1-2-3 auto and 1-2-3-4 auto modes.
  • Shift kill can be set at 20, 30, 40, 50, 60, 70, 80 or 90 milliseconds.
  • Can automatically control semi-automatic transmission kill sequences.
  • Gear selector outputs allow you to control otherdevices according to current gear selection. You can activate multistage nitrous systems, waste gates, fuel systems, timing control, or anything else according to transmission gear.
  • Plugs right into the Dyna 4000 Pro ignition kill input (and can be used with other ignitions)
 

PRODUCT OVERVIEW: Dynatek Billet Rotor

Dynatek Billet Rotor allow simple replacement of the mechanical advancer assembly and ignition rotor with an attactive one piece anodized rotor. The Dyna Billet Rotor is laser etched with accurate timing marks to make ignition setup a breeze. The Dyna Billet Rotor comes in a blue anodized version with two magnents installed for use with the Dyna 4000 ignition as well as in a black anodized version with one magnent installed for use with other ignitions such as the Dyna 2000 and Dyna S ignitions.

 

PRODUCT IMAGES

Dynatek Pro Series Crank Trigger Dynatek Two Stage Retard Module

Dyna Digital Remote Display Dyna Digital Remote Display

Dyna Shift Counter

 

Buy Dynatek Products Online


PRODUCT DETAILS

Dyna Remote Display, Retard Module, Shift Counter & Billet Rotor For Drag Racing

Part No. Item Price
TSRAM Dyna 4000 Retard module 2 & 4 Cylinder Progressive £305.53
TSRM-2 Dyna 4000 Retard module 2 cylinder £305.53
DSC-2 Shift Counter (6 Speed) £211.89
DBTR-1P Billet Timing Rotor 1979-83 Honda CB 750, 900, 1100 £59.13
DBTR-2P Billet Timing Rotor 1973-85 Kawasaki KZ 900, 1000, 1100 £59.13
DBTR-3P Billet Timing Rotor Suzuki GS 550, 750, 1000, 1100 £59.13

Dyna 4000 Pro Series Crank Triggers for Drag Racing

Part No. Item Price
DCT1-5 Honda CB 750, 900, 1100 £156.70
DCT1-6 Honda CBR 600F £156.70
DCT1-10 Honda CBR600F2/F3/900RR/1100XX £156.70
DCT2-1 Kawasaki KZ £156.70
DCT2-4 Kawasaki ZX10 1000, ZX11 1100, Ninja 900R/1000R £156.70
DCT2-7 Kawasaki ZX7,ZX7R ZX7RR,ZX9R £156.70
DCT2-11 Kawasaki 1998-00 ZX6 £156.70
DCT2-12 Kawasaki 1998-00 ZX9 £156.70
DCT3-2 Suzuki 600/750/1100/1150 £156.70
DCT3-3 Suzuki 86-92, 86-92 GSXR, Bandit 1200 S,Katana 600/750/1100 £156.70
DCT3-4 Suzuki GSXR 750 WC, 1100 WC £156.70
DCT7-1 Yamaha FJ1100/1200 £156.70
DCTHD Harley-Davidson £156.70

DYNA Performance Coils For Drag Racing

Part No. Outputs # Primary Resistance Secondary Resistance Color Quantity Style Price
DC9-1 2 0.7 ohms 11,500 ohms Blue 2 J £160.64
DC9-2 4 0.7 ohms 12,900 ohms Black 1 H £182.33
DC9-4 1 0.7ohms 14,000 ohms Blue 2 J £160.64